This big fully permitted Modern Farmhouse remodel in Oceanside is now well underway. We moved a lot of walls around and are doing major structural changes to convert this dated 5 bedroom, 3 bath into an open concept floor plan 4 bedroom, 2 bath with huge 9′ island kitchen and expansive master suite upstairs.
The style is “Modern Farmhouse” where we will run an all White and Black color theme with some industrial fixtures and gold hardware. Inside paint colors will also be all white with warm wood floors to anchor the space. Extensive use of subway tile and white shaker will complete the look, wait until you see the unique industrial pendant lights we are dropping over the island.
This is Part 1 which got us through the demo, permitting, rough framing, mechanical upgrades, central air, roof, insulation and drywall. Notice the awesome Shed Dormers I designed on the roof which gives it the Agrarian look we are going for.
This style is hot right now in LA and North County San Diego so it will be exciting to leave this mark on the hip South Oceanside neighborhood for years to come. Subscribe to our YouTube channel so you don’t miss the final video to see how it comes out!
Here’s a Sneak Peek of the new build we are doing in South Park. Rough framing is now complete, roof on, Milgard aluminum windows in, plumbing done, HVAC almost complete, next up is electrical and fire sprinklers then I can call for the big “rough-in” City inspection.
Building new construction is actually a lot easier than remodeling an old home. I liken it to model building when I was a kid. Its all about doing things in a certain order and planning ahead with ordering materials and taking deliveries.
Here’s my South Park floor plans modeled in 3D. Make sure and click on the pics to zoom in and take a look around, make yourself at home! This custom house is being built in the San Diego neighborhood of South Park by Green Button Homes. Nothing like this has been done in the area, we are San Diego’s cutting edge design/build general contractor!
We just went through some major building plan revisions for the South Park Modern/Craftsman house that we are building this summer here in San Diego. I could have already had building permits and started construction but after sitting with the City and having to compromise I just wasn’t going to be happy with the end product, so I opted to go back to the drawing board and with the help of my great designer we came up with something we both felt is way better. There’s so much to learn on new construction and what the City of San Diego will and will not allow, I’m chalking this one up to builder school and moving on. It only takes 8 business days to get your plans routed through Developmental Services downtown, then they give you a list of changes for your plans, luckily they are now hiring more staff after years of cut backs and lay offs.
The newly revised design, now close to 1900 s.f., is larger than neighborhood standards. Downstairs the kitchen, living and dining rooms are linked to create an open and continuous public space where guests can roam freely and have easy access to bathroom facilities under the staircase and enjoy fluid movement between indoor and outdoor living spaces via the bi-folding rear patio doors. This new design also makes more room for outdoor living space with 13′ of yard before the cantilever deck on the canyon. Light and vertical space make any room feel larger so with the 10′ ceilings downstairs and abundance of morning and afternoon light, the space should feel very comfortable. The facade is a sophisticated blend of traditional Craftsman style with a Modern influence. The bubble framing for the staircase windows on the driveway side creates a fun and whimsical touch for this hip and eclectic neighborhood.
The 2-car garage is now over-sized and attached to the house with an adjoining mud room/utility room with full size connections and the HVAC closet. I pulled it 4′ off the side property line to give the City required side set back since its an attached garage now, detached garages can sit right on the property line in my area believe it or not. All private spaces are nicely separated upstairs with an open gallery at the top of the staircase, 2 secondary gracious sized bedrooms and shared hall bath. The large master suite above the garage has a bonus sitting area and secondary set of stacked washer/dryer connections and then steps down into the bedroom to allow higher vaulted bedroom ceilings. Our East-facing master retreat will get great morning light and has a walk-in closet and really cool master bath with dual vanities, water closet and a wet room feature which includes the stand-up shower and spa tub not separated by a divider wall, behind frame-less glass doors and with casement windows looking down into the canyon. The wet room design is really en vogue right now in bathroom design and works great in small spaces.
Here are the plans for the custom house we’re building for ourselves in South Park. It’s a Clean Modern Craftsman 2-story design, 3 bedroom, 2.5 baths with a detached 2 car garage at around 1900 s.f. For the bungalow feel we did nice 2×8 barge rafters at the gable ends with an a-typical edge detail and bold yet simple 4×4 brackets over 6″ corner trim. Porch columns front and rear will be 8×8 in smooth Cedar, just sealed. You can see the first floor is wide open and expansive with 10′ ceilings, the entry leads you into the dining area that opens right across to the kitchen. In the island kitchen we have a walk in pantry and a peninsula for casual eating. There is a powder room under the stairs and then the whole back of the house is the great room also off the kitchen for entertaining with direct access to the back yard complete with covered porch and decking on the canyon. Indoor utility room is also just inside the rear door.
All the bedrooms are upstairs, gracious closet spaces, full master suite with sit down spa tub as well as stand up shower. Dual vanities in both upstairs bathrooms. Normally we try and put the master suite downstairs but we dont mind stairs so it worked better putting all bedrooms up. I’m doing exposed galvanized metal roofing on the open porch framing and aluminum Milgard casement windows as well to give the urban mod feel. The back porch also provides a perfect breezeway to the detached 2 car garage. Check out the balloon framing in action on the side elevation/staircase windows, this is definitely some out of the box home design that’s going to make a huge impact in South Park. Estimated completion December 2012. Thanks Morgan for the help!
I’m getting close to the stem wall pour, the guys worked on the forms all week. Inside the forms we hung 12″ j-bolts that will anchor the house to the foundation once it’s poured. Then we laid 4 rows of #5 rebar and secured it to the screw jacks with tie wire. Anywhere the stem wall is more than 24″ high we will hang vertical rebar 24″ on center as well. This is over and above local building codes but worth the extra expense. All the load from the weight of a house is carried on the exterior walls and down to the footings, it’s totally different for me here doing this as in Texas when building a pier and beam room addition you don’t do this perimeter foundation. The plastic sheeting you see is to keep the concrete from blowing out the back once we pump it into the form cavity. All that’s left now is to set the outside forms, we’ll cut windows along the top of the outside so we can pump the concrete in.
I also got the new master suite all framed up, it’s 375 s.f. and includes 9′ ceilings, a big bathroom that fits dual vanities, soaker tub, stand up shower and water closet. There’s also a generous sized walk in closet and french doors off the back. While the framers were there I also had them raise the kitchen ceiling, move some closets around upstairs and add some really cool tray ceilings in the living room and dining room that I’ll use for my mechanicals and central heat ducting to get upstairs. We also added fire blocking to the entire house since I had all the walls open. I bumped up the room addition ceiling joist size to 2×8 and the roof rafters to 2×10 just to ensure the inspector likes what he sees and I get off on the right foot with him. It’s coming out pretty trick, I’m excited about how easy it was to really modernize this 100-year-old floor plan and am confident it’s going to help sell the house. The prices I’m nailing down for mechanicals on this 2000 s.f. house so far are as follows: Complete electrical with new 200 amp service: $5300. Complete plumbing with copper supply, gas lines and all new ABS waste lines: $5000. Complete new central heat system with new furnace and ducting: $1800. New roof: $2000 labor. These are killer prices and all from legal, licensed sub contractors, I couldn’t have done better in Texas. Thanks to everyone locally who has sent me referrals, after this huge project I’ll have a great team ready for any size project!
