For those of you guys who missed it, here’s my interview from tonight with Jim the Realtor on Blog Talk Radio. We ran a little over time, I think its about an hour and a half. Thanks to Jim and Richard for putting it together, and you guys who participated online and called in. Please share it or tweet it!
http://www.blogtalkradio.com/jim-the-realtor/2012/02/14/tom-tarrant-on-btr-with-jim-the-realtor
Right on track we are moving into the interior paint job on our Mid Century Modern renovation. Up top on the Cedar tongue and groove ceiling, I was at a crossroads this week with regards to what product I should use on it after all that work sandblasting it raw. Cedar is a soft wood with natural tannins in it, so any oil based poly or urethane would certainly make the wood darker which I didn’t want to do. There were many options such as linseed oil, wood wax, polyurethane, acrylic sealer, Danish oil, etc. Also some thick poly’s will yellow over time and darken the wood. I ended up using Satin Deft Acrylic Wood Finish from Home Depot. I sampled this product also in semi-gloss and gloss but it came out a little hazy for my liking. I couldn’t spray the Deft Finish and get enough penetration so it had to be applied thick with a roller and then back brushed in order to get into the open grains.
It came out really good, highlighting the natural color and grains and doesn’t look too plastic-like or shiny. The walls are also now in primer with Glidden PVA drywall primer. We are applying it with a 1/4″ nap roller and then sanding between coats in order to keep our smooth texture and not add roller stipple. On the walls I’m going with Decorator White by Behr this time in flat for the whole house, except I’ll switch the sheen to satin in the kitchen and bathrooms. With my wood ceilings and floors there’s no chance of the house looking too sterile with the white walls. Next up we’ll be spraying all the interior doors and trims with the color Sherwin Williams Snowbound in semi-gloss. The beams in the house now have the first coat of Behr Olive Leaf in satin on them as you can see. The dark green next to the natural reddish Cedar is really contrasting and looks dramatic and especially period correct.
My new stucco guy came this week to do all the patching around my aluminum windows and doors we put in as well as scratch and brown coat the front of the garage where we covered the existing paneling. After 2 days of showing up after 9 am by himself, he finally brought in a helper and they knocked it out. I look to hire sub contractors who are there at 7:30, bust ass all day like we do, and not drag it out. There are really 2 kinds of contractors out there, the hard working, taking care of business hungry guys and then the ones that seem to drag everything out and want to make small talk with you all day.
When he opened his air compressor line to bleed out the tank on my new driveway I almost lost it. You guys who have air compressors know that the air inside the tank is usually oily and rusty and will stain anything it drains out on. There is a job site etiquette that most guys follow but this guy clearly doesn’t see the big picture. When I called him out on it he mumbled something about it being a “flip” to one of my workers, as if that puts my job in a different category of service from him. Don’t get me wrong we have fun at work but I don’t think I’ll be using this guy again no matter how good the price or end product is. This year I am really concentrating at building the best team possible which will make my business run smoother for the future. It’s a continual battle, first you find sub contractors and then you start switching them out for better ones. Like anything else, the good sub contractors are always busy. The B grade ones will usually be the guys you find first.
Don’t forget to tune into my interview on Blog Talk Radio Monday night at 8 PM PST hosted by Jim The Realtor. You guys can actually call in to the show using the 1-800 number if you aren’t too shy or type me house flipping and design questions live. If you miss it we’ll have a podcast available after the show. Here’s a link to listen live tomorrow night:
http://www.blogtalkradio.com/jim-the-realtor/2012/02/14/tom-tarrant-on-btr-with-jim-the-realtor
I’m really excited about the Milgard aluminum windows I picked out for this house and have to say I’ve removed tons of aluminum windows but this is the first time I’ve ever put them In. They are a modern energy efficient version of what we took out. With my right hand man Barney, we got them all installed including the 6 foot and 8 foot patio doors in a day and a half. These are new construction windows meaning you have to break the stucco back to install them using nailing fins. Putting them in is easy but the most important part is getting new flashing behind the old felt paper and using Jiffy Seal around them for a good seal. When breaking out your old ones try not to damage the wire mesh or felt paper. There’s a lot of guys flipping houses in San Diego and throwing in retrofit or vinyl lip windows. Believe me, you don’t want to put in vinyl retrofit windows, they will not hold air and warp in less than 10 years. I know because I have them in my house!
For our Mid Century project I wanted to get the stream-lined modern minimalist look so the aluminum was a clear choice. I wanted to use a mixture of casement and awning windows on this project so the master bedroom window was a perfect candidate to replace the old huge slider with a fixed window and 2 casements on the sides. I was able to put together a custom front window also with an awning on the bottom and slider on the top as seen here. I almost went with a really cool look – triple awning on the front, but thought there might not be enough air flow on those hot San Diego summer nights with no A/C so I played it functionally safe and put sliders in the secondary bedrooms as well. Since we are re-stuccoing the whole house I also took this opportunity to break out and replace all the old crawl space vents as you can see at the bottom of the top picture.
After price shopping around at 4 places I ended up getting the best deal at Home Depot. These are special order windows and take 3-4 weeks to arrive so you want to order them as soon as possible so they don’t slow your project down. For orders over $2500 you can request special pricing from the Home Depot Bid Room. Just ask to do so at the Millworks or Contractors desk. In my case they knocked off another 14% and with no delivery charge I ended up paying about $3600 for all the windows including a 6 foot and 8 foot patio door. These windows are of course low E and dual pane. The patio doors were a little more tricky because the frames come in 4 pieces but easy for anyone to do and they installed like a dream. They shut so good it sounds like an airplane door.
I tried out a new drywall patching crew this time and am super happy with the results. They cut out everything square, patched all my Swiss cheese holes from running the mechanicals, and then skim coated the entire house with a new 90% smooth texture. They also had to redo some of the window and door returns from our install, so it was nice to have them there fixing stuff as we were putting in the windows. The inside is ready for paint now, everything is really going smooth with this house. I’m off to the recycle yard with the old aluminum windows now for a nice bonus check for helping the environment!
We are staying pretty much on track at the Mid Century Modern renovation, this week we updated and changed around the mechanicals of the house to fit our new design. After my old plumber didn’t show up, I moved on and hired a new guy which really handled business. To prep the exterior for the new stucco job we also had the house sand blasted. You cant put new stucco over paint. I always find it best to do this before you put your new windows in if possible so you don’t accidentally blast them too! Next up for this week is put the new windows and rear sliders in, patch all the drywall and then we’ll be ready for interior paint and tile. We’ve had several interested buyers already stopping by, just wait until they see the dramatic change that will soon take place!
On Monday, February 13, 2012 at 8:00 pm PST I’ll be doing a live interview on Blog Talk Radio hosted by Jim The Realtor.Jim will be asking me tons of house flipping questions relating to how I got started, what I look for in houses to flip, how I find deals and stories about some of the huge rehab projects we’ve showed you on this site. There’s tons of great stuff that never makes it online so make sure and tune in if you want to hear Jim and I talk about my house flipping business. My regular blog readers know I love to share, so this should be pretty entertaining and educational.
Click on the Blog Talk Radio icon to listen to the show.
I’m real honored to be asked to do this interview, especially coming third up to bat after heavy hitting interviews from Rich Toscano of Piggington.com and this weeks guest Bill McBride of Calculatedrisk.com.
If there are some questions or topics you would like us to cover, please leave them here in the comment section, or over at Jim’s site www.bubbleinfo.com, or listen live and call in to the show and ask them yourself!